Do you want to know What Happens When You Calibrate Your Phone? Looking for an explanation as to why calibrating your phone is even necessary? These are some of the questions we want to answer with this article’s assistance.

What Is Battery Calibration?

The Android operating system must keep track of your battery and charge levels to notify you whether they are full or empty. The issue is that it sometimes gets corrupted and begins showing data that isn’t genuine, causing the phone to shut down before it reaches 0% charge.

This data difference may also be caused by aging. All batteries deteriorate with time, and an older battery can no longer store as much charge as it once could. However, the software that runs on your phone typically does not consider this deterioration when presenting the screen’s battery status.

In short, the chip and chemical capacity are not yet calibrated. You must calibrate or re-calibrate the battery to accurately estimate its power.

Why Is Calibration of Your Phone Important?

After your phone has been exposed to very cold or scorching temperatures, or if your phone is displaying any of the following symptoms, you should calibrate your battery at least once every two to three months. Ideally, it would be best to calibrate your phone battery every two to three months.

  • Displaying a full charge before abruptly dipping drastically low
  • Staying “stuck” on a single charge percentage for an extended time.
  • After charging and draining, the charge % remains the same.
  • Discharging faster than intended.
  • The refusal to charge.
  • You need to charge your phone many times or leave it plugged in throughout the day.
  • Reporting battery difficulties through pop-ups even when the phone is generally operational.

What Does Calibrating Your Phone Do?

Calibrating your Android Phone battery means asking the Android phone to adjust this information to indicate your actual battery levels. It’s essential to know that this technique does not truly calibrate (or enhance) the battery.

Before Calibration of Your Battery

Before calibrating your battery, you must check your battery pictorial. If you see any bulges or leaks, or if the case of your phone begins to loosen or break, your battery is damaged and must be replaced. This is particularly true if your phone’s battery performance suffers soon after being dropped.

You must also delete the cache on your Android phone and, if available, install any firmware and operating system upgrades. This will aid in the calibration process and may assist with other difficulties.

What Happens When You Calibrate Your Phone?

If you’re an Android user, you’re probably aware of the OS feature known as Battery Stats. It monitors the battery capacity and determines whether it is full or empty. When the Battery Stats is corrupted, inaccurate data is shown. For example, your phone may switch off before it reaches 0 percent charge.

After calibration, the battery’s charged percentage will be reset to match the absolute charged status. You may then resume regular phone operation.

How To Calibrate Battery Samsung?

Follow the steps below to learn how to calibrate the battery on your Samsung Android smartphone:

1. Use your phone until the battery power is down to 5 percent, and please don’t plug it into a power outlet.

2. Then, open the phone dialer and type in this code: *#0228#

3. You will be taken to the page called BatteryStatus. Tap the button at the bottom of the screen that says “Quick Start.”

4. After that, a warning message came up on the screen. Tap OK.

5. As soon as you tap OK, the battery percentage will go down.

6. Recharge your phone until 100 percent.

7. Turn off your phone’s power, turn it back on, and then unplug the charger from your phone.

8. Repeat steps 1–7 twice or thrice.

9. Plug the charger back into your phone until the battery is fully charged.

10. Turn off the power and back on again, then dial *#9900# on your phone.

11. Scroll down until you see “batterystats.bin reset,” then tap it.

12. The final step is leaving the menu and turning your phone back on.

Should You Calibrate A New Phone Battery?

Battery calibration should not be necessary for a new phone. However, if you are experiencing difficulties. Charge your phone to 100 percent, then totally drain the battery so that the phone shuts off, then reset the phone so that the leftover battery drains out and repeat the procedure.

How Often Should You Calibrate Your Phone?

Smartphone manufacturers suggest Calibrating your phone’s battery once per month. Lithium-ion (Li-ion) or lithium-polymer (Li-po) batteries are used in Android phones. These batteries do not need to be completely depleted and are equipped with smart chips that eliminate the requirement for calibration.

Is It Good To Calibrate Your Phone Battery?

All freshly installed smart batteries should be calibrated instantly. This allows your phone battery to obtain an accurate readout on the level of charge of the battery.

Battery calibration is not suggested if your phone is not experiencing problems. This isn’t a correct way to enhance battery life; it’s merely a way to assist your phone’s software battery meter in corresponding with the actual charge of your battery.

Does Battery Calibration Increase Battery Life?

Unfortunately, many people don’t know how helpful it can be, and even fewer take the time to do what needs to be done. Without a properly calibrated battery, the percentage readings will likely be off, the battery will drain faster, and the battery will last shorten overall.

Calibrating the battery won’t make it last longer, but it will give you a better idea of how much power is left in your device.

If you like our information, then share this with your friends, I will come back with new interesting information on our website, till then bye bye:)


Please enter your comment!
Please enter your name here